FAQ

Shake the contents of the bottle vigorously for 30 secs. Empty the contents into 5L Distilled Water (<10 TDS). Rinse the concentrate bottle with the same water & empty the contents into the same 5L DW. Shake or Stir the whole 5L once to speed up mixing. Brewing Water once prepared must be stored in a Cool Dry Place, away from direct sunlight. Refrigerate for Best Results.

Mgic Potion is designed to be used with Distilled or Demineralized water i.e. 0 TDS water (atleast < 10 TDS). However if your RO Water is of very low TDS (30 or less) you can still use it with RO water. If you are not able to find a good source of Distilled water, you can use Mgic Potion with RO Water, Bisleri or any other packaged Mineral Water. However, we cannot guarantee the flavour profile you will obtain with this water. It might still be better than what you were getting before adding Mgic Potion to it.

Mgic Potion is designed to elevate flavours by causing better extractions in your brewing. What this means in simpler terms is, water does half of the job required to dial in all the parameters for that perfect cup. So it is just half the effort in making that cup perfect.

Method 1 - Using a TDS Meter: - Add 2.6ml of Mgic Potion to 1000ml of distilled water. - Check the TDS (Total Dissolved Solids). If it’s lower than the target TDS, add more Magic Potion. If it’s higher, add distilled water to dilute it. Method 2 - Without a TDS Meter: - Add 1 bottle of Mgic Potion to 1000ml of distilled water. - Divide the prepared brewing water into 5 equal parts (202.4ml each). - For each portion, add 797.6ml of distilled water to make 1 litre of brewing water. Please refer to the images below for a better understanding. Abbreviations used: DW: Distilled Water DC: Diluted Concentration BW: Brewing Water MP: Mgic Potion TDS: Total Dissolved Solids